NINGBO SUNTHAI BEARING CO.,LTD SUNTHAI^®  F&F^®
TEL：+86-574- 87222434 87220319 87220519 (EXT) 8013
FAX：0574-87223781 E-mail：stb888@sunthaibearing.com
ADD：NO.1730 LIYUAN NORTH ROAD, NINGBO, CHINA
WEBSITE：www.sunthaibearing.com   www.fbearing.com

Angular contact ball bearings

Single-row	Back-to-back arrangement	Face-to-face arrangement	Tandem arrangement	Double-row
	DB	DF	DT	With filling slot
7000, 7200, 7300, 7400 Contact angle 30   7000B, 7200B, 7300B, 7400B Contact angle 40 7900C, 7000C, 7200C, 7300C   Contact angle 15 HAR900C, HAR000C Contact angle 15				3200 3300 Contact angle 32	5200 5300 Contact angle 24

Bearing rings and balls possess their own contact angle that is normally 15, 30 or 40. Larger contact angle --- higher resistance against axial load Smaller contact angle --- more advantageous for high-speed rotation Single-row bearings can accommodate radial load and axial load in one direction. DB and DF matched pair bearings and double-row bearings can accommodate radial load and axial load in both directions. DT matched pair bearings are used for applications where axial load in one direction is too large for one bearing to accept. Angular contact ball bearings are used for high accuracy and high-speed operation.

SUNTHAI  F&F  BEARINGS  E-MAIL/MSN: STB888@SUNTHAIBEARING.COM

More products from SUNTHAI    Series of Miniature Ball Bearing    Series of Deep Groove Ball Bearing  Plane Thust Bearings  Series of Linear Bearing  Center-Adjustable and Angular Contact Ball Bearing  Needle Roller Bearing         Cylindrical (Taper) Roller Bearings   Centripetal Joint Bearing      Non-Standard Ball Bearing

maybe you are interested in the below article

• New Thin Section Contact Series Ball Bearings From QBC Feature Four-Point Contact or Conrad Styles  (2009-6-27 14:25:15)
• BALL BEARINGS - PART NUMBERING SYSTEM   (2009-6-24 16:39:20)
• Ball Bearings cont. - Lubrication  (2009-6-24 14:28:50)
• Fig. 11-4 Thrust ball bearings   (2009-6-22 16:31:23)
• Clearance specifications --- Self-aligning ball bearings  (2009-6-22 15:10:8)
• Clearance specifications --- Double-row angular contact ball bearings  (2009-6-22 15:7:25)
• Clearance specifications --- Matched pair angular contact ball bearings  (2009-6-22 15:7:20)
• Clearance specifications --- Deep groove ball bearings  (2009-6-22 15:5:37)
• Recommended fits --- extra-small/miniature ball bearings(d10mm)  (2009-6-22 14:47:7)
• Table 4-15(3) Cylindrical roller bearings (non-rib side) and angular contact ball bearings (front face side) --Permissible values for chamfer dimensions  (2009-6-22 14:5:31)

Comments